This is one of the most simple wind mills we’ve found. You can create this power generating wind mill for undrer $200.
You will need:
27″ Snow Shovels
4″ Round Weatherproof Box
4″ Round Weatherproof Cover
Galvanized Pipe Nipple, 3/4-Inch X 12-Inch
EMT Snap N Set Screw Connector, 3/4″
J-B Weld
Self-Drilling Screws
Pillow Block Bearings
A stick of 3/4″ EMT electrical conduit.
Tim Block
Donald Nalley
You can use automobile alternator, GM 1 wire type. They will make up to 125 amp 12 volt dc power. That would keep your batteries charged. With a 12 volt to 110 ac inverter to run whatever device you want to run. The more batteries you have, the more devices will work for you. The inverters need to big amp output for your needs.
Ronald Harris says:
“You can use automobile alternator, GM 1 wire type. They will make up to 125 amp 12 volt dc power. That would keep your batteries charged. With a 12 volt to 110 ac inverter to run whatever device you want to run. The more batteries you have, the more devices will work for you. The inverters need to big amp output for your needs.”
From: http://www.truthandaction.org/very-simple-and-easy-wind-mill-for-under-200/comment-page-1/#comment-417033
look up TT Brown.com, and Nikola Tesla
Grant Heath… Challenge?
ANNDDDDDD america bans it. like they did with this http://thespiritscience.net/2014/05/25/volkswagens-new-300-mpg-car-not-allowed-in-america-because-it-is-too-efficient/ .
Good info
best use of a snow shovel in southern nevada
rob says:
“Same setup looks like it could be used as a waterwheel”
From: http://www.truthandaction.org/very-simple-and-easy-wind-mill-for-under-200/comment-page-1/#comment-421736