A new 3-dimensional computer model simulated the alleged plane strike to the World Trade Center’s North Tower exactly as reported according to the 911 commission report.
These findings give a very vivid depiction as to how the Sept. 11th attack looks according to the official reports. Except unlike most simulations, this 3D model raises more questions than it answers.
The simulation carefully reproduces in 3D the entire airspace surrounding the North Tower of the World Trade Center as it stood before the attack on Sept. 11th, 2011. According to the official Commission, one of the attackers flew a Boeing 747 into the north face of the tower.
Official reports state that the buildings collapsed due to the heat and fires generated from the two planes crashing into the side of the buildings.
53 video clips were compiled by lead researcher Richard D. Hall into a 1-minute presentation to analyze if the footage was shown on the news the day of the attack aligned with the “official flight path”.
Learn more about this new investigation and watch the 3D simulation on the next page
Tammy Bistarkey exactly….The Pentagon strike site…where is plane?
Got that right Tina Taylor!
Stay asleep Larry Abell
No, all the upper floors on top would not be in flame because each floor (truss) were steel with 4 inch of concrete on top of them. The heat was rising up to the upper floors via the core of the building which was the hottest area of the buildings, not the exterior were the hole was at.
And the fire alone didn’t contribute to the collapse. Keep in mind that the weight of the mass that was over the fire was 80,000 tons (Tower 1) and 130,000 tons (Tower 2).
On top of that the building sway, which is anywhere from 1-5 feet sway.
So, there are core columns being weakened while trying to hold up 80,000 tons of weight directly on top of it while the towers are at constant seat and since there was a huge hole in the exterior of the building, that weight needs to be transferred and its weight had to have been redistributed towards the core.
No, all the upper floors on top would not be in flame because each floor (truss) were steel with 4 inch of concrete on top of them. The heat was rising up to the upper floors via the core of the building which was the hottest area of the buildings, not the exterior were the hole was at.
And the fire alone didn’t contribute to the collapse. Keep in mind that the weight of the mass that was over the fire was 80,000 tons (Tower 1) and 130,000 tons (Tower 2).
On top of that the building sway, which is anywhere from 1-5 feet sway.
So, there are core columns being weakened while trying to hold up 80,000 tons of weight directly on top of it while the towers are at constant sway and since there was a huge hole in the exterior of the building, that weight needs to be transferred and its weight had to have been redistributed towards the core.
2nd biggest mystery: Vegas shooting
Kiss my as* on this thing my friend was there and seen both planes and he sister was on the one that hit the second tower ! So p**s off if you think you know better !
Ok for all those on the streets that watch the second plane fly into WTC. What it was rigged????
Interesting account…….hmm.
https://www.youtube.com/watch?v=7md2QzNsAe4
Still would have melted aluminum puddles. Remains smart azz